MIL-DTL-43613E
FEDERAL SPECIFICATION
L-P-390
- Plastic, Molding and Extrusion Material, Polyethylene and
Copolymers (Low, Medium, and High Density)
FEDERAL STANDARDS
FED-STD-595/30279
- Brown, Flat, Lusterless
FED-STD-595/34094
- Green, Flat, Lusterless
(Copies of these documents are available online at https://assist.daps.dla.mil/ or from the
Standardization Document Ordering Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.2.2 Other government documents, drawings, and publications. The following other government
documents, drawings, publications form a part of this document to the extent specified herein.
Unless otherwise specified, the issues are those cited in the solicitation or contract.
DRAWINGS
U.S. ARMY NATICK RESEARCH, DEVELOPMENT, AND ENGINEERING CENTER
2-9-248
- Can, Water, Military, Plastic, 5-Gallon Capacity; Assembly
2-9-249
- Can, Water, Military, Plastic, 5-Gallon Capacity; Cap Assembly
2-9-285
- Adapter, Assembly and Details
(Copies of drawings are available from the U.S. Army Natick Research, Development, and
Engineering Center, ATTN: STRNC-UXT, NATICK, MA 01760-5017.)
2.3 Non-government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ Z1.4
- Sampling Procedures and Tables for Inspection by Attributes
(Copies of this document are available from www.asq.org or the American Society for Quality,
611 East Wisconsin Avenue, Milwaukee, WI 53202.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained
3. REQUIREMENTS
3.1 First articles. When specified (see 6.2), a sample shall be subjected to the first article
inspection (see 6.3) in accordance with 4.2.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business