A-A-675 Cover, Receptacle, Swinging Door

Pages 1 - 2 - 3 - 4

A-A-675A

4. Regulatory Requirements. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraphs 23.403 of the Federal Acquisition Regulation (FAR)

4.1 Metric Products. Products manufactured to metric dimensions will be considered on a equal basis with those manufacturer using inch-pound units, providing they fall within tolerances specified and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable.

5. QUALITY ASSURANCE PROVISIONS:

5.1 Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices and is the same product offered for sale in the commercial market place. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

6. Packaging. The preservation, packing, and marking shall be as specified in the contract or order.

7. NOTES

7.1 Part Identification Number (PIN). Waste receptacle covers conforming to this commercial item description shall be identified by a part number configuration consisting of identification from a portion of the CID number, type, class, style and size. An example of the part number configuration is shown below. This part numbering system is intended for identification and cross indexing of the item within numbering procedure is for government purposes and does not constitute a requirement for the contractor.