A-A-324 Waste Receptacle, Plastic, With Interchangeable Tops, Lid, Or Cover And Liner

October 5, 1979

COMMERCIAL ITEM DESCRIPTION

WASTE RECEPTACLE, PLASTIC, WITH INTERCHANGEABLE

TOPS, LID, OR COVER AND LINER

The General Services Administration has authorized the use of this

Commercial Item Description

This commercial item description covers plastic waste receptacles with Interchangeable tops.

Salient characteristics:

(1)          Color- as specified

(2)          Capacity- 57 (+3) gallons

(3)          Shape- square or rectangular

(4)          Material- high density polyethylene with ultraviolet inhibitors

(5)          Liner- rigid plastic or polyliner with a method for holding the polyliner, as specified.

(6)          Interchangeable tops- as specified

 (a) Hooded top with swinging doors.

 (b) Hooded top without swinging doors.

 (c) Swinging lid.

Workmanship.  Free from flash, blisters, cracks, chips, sharp fins, sharp edges, lumps, and embedded foreign material. The rigid liner shall not leak, crack split, or become permanently deformed when filled with water.

Certification.      The contractor shall certify that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producer’s own drawing, specifications, standards, and quality assurance practices and is the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

Recovered materials.     The manufacturer shall utilize recovered materials to the maximum extent practicable.

Packaging, packing and marking.               Each waste receptacle shall be packaged in accordance with normal commercial practice and packed in fiberboard boxes that will assure acceptance by common carrier and provide product protection against loss and damage during multiple shipments, handling, and storage. The shipping container shall be in compliance with National Motor Freight Classification and Uniform Freight Classification. Marking shall be as specified in the contract or order.